欢迎访问安徽芯脉光电科技有限公司官网

预绞式耐张线夹

预绞式耐张线夹用于输配电线路的裸导线或架空绝缘导线安装，产品可靠性及经济性优于目前线路上广泛使用的螺栓型、液压型耐张线夹。

商品名称：预绞式耐张线夹

所属分类：

产品咨询：

产品描述

预绞式耐张线夹用于输配电线路的裸导线或架空绝缘导线安装，产品可靠性及经济性优于目前线路上广泛使用的螺栓型、液压型耐张线夹。
预绞式耐张线夹的结构简单，安装后预绞丝双腿形成的管状结构自然缠绕在导线上可产生极强的握紧力，新颖的结构和精密的设计，使导线耐张线夹拥有可靠的性能。线夹通常由铝包钢、镀锌钢丝等材料制造。
Dead-end for Short Span ADSS with a small Tension Clamp material for aluminum-cladsteel wire, mainly used for the comer towers, the middle of follow-towerand connecting the terminal tower, the largest installation filefrom the less than 100 meters.

产品系列分为/Pictures and illustrations
预绞式导线耐张线夹 Pretwisted wiretension damp
预绞式地线耐张线夹 Pre twisted ground wire tension clamp
预绞式拉线耐张线夹 Pre twisted tensloncable clamp

特点/Characteristic
1)线夹强度高，握力可靠。线夹握力强度不小于95UTS(绞线计算拉断力)。
2)线夹对导线应力分布均匀，不损伤导线，提高了导线抗振能力，大大延长了导线的使用寿命。
3)安装简单，便于施工。可大大缩短施工时间，无需任何专用工具，一人即可完成操作。
4)线夹的安装质量易于保证，用肉眼即可进行检验，不需专门训练。
5)耐腐蚀性好；材质与导线完全一致，保证线夹具有较强的抗电化学腐蚀的能力。
1)The wire clamp has high strength and eliable grip strength. Thegrip strength of the wire clampshall not be lessthan 95?TS (calculatedtensile strength of the stranded wire).
2)The wire dlampevenly distributes the stress on the wire,does not damage the wire,improves the wiresvibration restance, and greaty extends the wire's service life.
3) Easy instalation and easy construction. It can greatly shorten construction time without the need for any specalized tools, andcan be completed by one person.
4)Theinstallationqualityofthe wire clampls easy to ensure, and can be inspected with the naked eye without the need for specialzed training
5) Good corrosion resistance; The material is completely consistent with the wire,ensuring that the wire clamp has strong resistance to electrochemical corrosion.

提示/Prompt
1)由于线夹的特殊结构，线夹受力后只能使用一次，不得重复使用。
2)选配产品或订货时必须提供导线的规格型号。
3)不得在线夹上搭接，但在线夹前后的导线上进行搭接是允许的。
4)线夹和导线的旋向应保持一致。标准的线夹是右旋，如需左旋产品须声明。
1)Due to the special structure of the wire clamp,it can only be used once after being subjected to force and cannot be reused.
2) When selecting productsor placing orders, the specifications and models of the wires must be provided.
3) Lapping is not allowed on the wire clamp, but itis allowed to overlap on the wires before and after the wire clamp.
4) Therotation direction of the wire clamp and wireshould be consistent.The standard wire dampisrighthanded,andifa lefthanded productisrequired,it must be declared.

标签：